Self-Propelled Economical Vertical Lift
The Self-Propelled Economical Vertical Lift is light and exquisite, convenient and flexible. It can pass through the general foyer, enter and exit elevators at will, save energy and electricity, and work without hurting the ground. It is ideally suited for wall-mounted work and exploration work, and is widely used in hotels, hospitals, stations, airports, warehouses, and other professional settings.
Safe and reliable operation performance is guaranteed; the base pothole protection device provides maximum peace of mind during operation.
✓ Proportional controls
✓ DC power supply
✓ Drivable at full height
✓ Beacon
✓ Non marking tyre
✓ 2WD
✓ Automatic braking system
✓ Anti burst valve on cylinder
✓ Emergency stop button
✓ Auxiliary lowering
✓ On board Diagnostic system
✓ Tilt sensor with alarm
✓ Forklift pockets
✓ Charger protection
✓ All motion alarm
✓ Horn
✓ Double wheel brake
✓ Hydraulic braking release
✓ Anti-dust cover on the mast
✓ Powder coating painting
+ AC power to platform
+ Overload sensor with alarm
+ Platform working light
+ Air tube to the platform
+ Platform extension
+ Self-lock gate on platform
+ Hour meter
+ Machine Body cover
+ Wireless tracking
The Self-propelled Aerial Order Picker must be stored in a horizontal position to prevent oil and electrolyte overflow during transport and storage.
Storage areas must be kept clean, dry, and protected from adverse climates. The environmental temperature should not exceed 40ºC. If the battery is not used for a long period, it should be recharged timely to maintain its health.
Frequently Asked Questions
1. What is the maximum working height of the MG600-1S?
The MG600-1S model has a maximum platform height of 6 meters, which provides an effective working height of approximately 8 meters.
2. Is this lift suitable for sensitive indoor flooring?
Yes, it comes equipped with non-marking tires as standard, allowing it to operate on finished floors without leaving marks or causing damage.
3. Can the lift be operated while the platform is fully raised?
Yes, the unit is designed to be drivable at its full height, providing efficient movement between work areas without needing to lower the platform.
4. What type of power source does the equipment use?
It is powered by a DC system featuring two 12V/115ah batteries, complemented by an on-board 24V/12A charger.
5. What safety features are included for operator protection?
Safety features include an emergency stop button, automatic braking system, tilt sensor with alarm, anti-burst valves on the cylinder, and a base pothole protection device.
6. Can this lift fit into standard elevators?
Yes, with a compact specification of 1.36*0.79*2.08m and a lightweight design, it is specifically built to pass through general foyers and standard elevators easily.